Grumbacher Pre-Tested Artists' Oil Color - Naples Yellow Hue, 1.25 oz tube

Pigment Information

This color contains the following pigments:

PY35:1-Cadmium-Barium Yellow

PBr7-Burnt Umber

PR108-Cadmium Red

PW4-Zinc White

Pigment Name

PY35:1-Cadmium-Barium Yellow

Pigment Type

inorganic

Chemical Name

cadmium zinc lithopone

Chemical Formula

CdSZn + BaSO4

Properties

Cadmium Yellow is brilliant, dense, and opaque, with good tinting strength and very high hiding power. It is the artist’s principal bright yellow and is available in light, medium, and dark shades. The deeper shades appear deep orange and have the greatest tinting strength. It is slow-drying in oil form and is used in both oil and watercolor form. It cannot be mixed with copper-based pigments. A clean Cadmium Orange is created when Cadmium Yellow is mixed with Cadmium Red. Hues vary by brand. Cadmium pigments have been partially replaced by azo pigments, which are similar in lightfastness to the cadmium colors, cheaper, and non-toxic. Cadmium Yellow PY35:1 shares the properties of Cadmium Yellow PY35, except that it has lower tinting strength.

Permanence

Cadmium zinc lithopone has excellent lightfastness. It shares the permanence of pure cadmium zinc sulfide (Cadmium Yellow PY35). All cadmium pigments have limited weather resistance, and are unsuitable for outdoor applications.

Toxicity

Cadmium Yellow is a known human carcinogen. It is extremely toxic if inhaled and slightly toxic if ingested. Barium sulfate is extremely insoluble in water, and thus is not biologically active. It is used medically as a contrast medium in radiological pro

History

Cadmium Yellow PY35:1 is cadmium yellow pigment that contains 15% or more barium sulfate. It is used to create a less expensive alternative to PY35.

Pigment Name

PBr7-Burnt Umber

Pigment Type

earth

Chemical Name

iron oxides with manganese silicates or dioxide

Chemical Formula

Fe2O3,MnO2 or Fe2O3+MnO2+nH2O+Si+Al2O3

Properties

Burnt Umber is a more intense reddish brown pigment that results from heating the clay pigment Raw Umber. It has medium to excellent tinting strength and high opacity, and it is quick drying in oil form. Burnt Umber is somewhat more transparent than Raw Umber. It has excellent color properties and can create a variety of subtle, clear tints when mixed with white. It can tend towards chalkiness in dark mixes in oil form, but overall it mixes well with other colors. To create a black color in oil form, mix Burnt Umber with Phthalo Blue or Ultramarine. To achieve a similar color in watercolor form, mix it with Ultramarine or Payne's Gray.

Permanence

Burnt Umber has good permanence.

Toxicity

Burnt Umber itself is considered non-toxic. If contaminated by manganese compounds, it may be highly toxic if inhaled and moderately toxic if ingested.

History

This pigment gets its name from the Latin word umbra, meaning shadow or shade. Its full name is listed as terra di ombra, meaning earth of shadow/shade, due to its original extraction from the area of Umbria, Italy. It has been used as a pigment since prehistoric times. Currently, the finest umber comes from Cyprus.

Pigment Name

PR108-Cadmium Red

Pigment Type

inorganic, cadmium

Chemical Name

cadmium sulfide and cadmium selenide

Chemical Formula

CdS x CdSe

Properties

Cadmium Red is a bright, warm red that ranges in shade from orange-red to maroon and is available in light, medium, and dark versions. It is strong and opaque, with good tinting strength. Cadmium Red dries slowly. It grays down when mixed with white, mixes well with blues to create a range of browns, and mixes well with Cadmium Yellow to create a strong orange. It also works well in neutral mixes. Cadmium pigments have been partially replaced by azo pigments, which are similar in lightfastness to the cadmium colors, cheaper, and non-toxic. Hues vary by brand. Cadmium Red is usually available in either a pure grade or a cadmium-barium mix. The cadmium-barium mix has the same permanence as pure Cadmium Red, but it has a lower tinting strength.

Permanence

Cadmium Red is lightfast and permanent in most forms, but like many cadmium pigments, it will fade in fresco or mural painting. Its improved lightfastness has helped it to replace Vermilion on the artist’s palette.

Toxicity

Cadmium Red is a known human carcinogen. It is extremely toxic if inhaled and slightly toxic if ingested.

History

Cadmiums get their names from the Latin word cadmia meaning zinc ore calamine, and the Greek word kadmeia, meaning Cadmean earth, first found near Thebes, the city founded by the Phoenician prince Cadmus. Metallic cadmium was discovered in 1817 by Friedrich Strohmeyer, but Cadmium Red was not introduced until 1907 in Germany.

Pigment Name

PW4-Zinc White

Pigment Type

inorganic

Chemical Name

zinc(II)-oxide

Chemical Formula

ZnO

Properties

Zinc White is the coolest white, and it has a cold, clean masstone and a slightly bluish tint. It has less hiding power and is more transparent than other whites. It dries slowly and is good for painting wet into wet and for glazing and scumbling. Zinc White is neither as opaque nor as heavy as Lead White, its covering power is not as good, and it takes much longer to dry. However, it does not blacken when exposed to sulfur in the air as Lead White does. It is very valuable for making tints with other colors. Unmixed Zinc White dries to a brittle and dry paint film that may crack over the years, so it is not good for frescoing. It is more transparent in acrylic form than Titanium White and is the most commonly used white with gouache. Chinese White is a version of Zinc White appropriate for opaque watercolor techniques.

Permanence

Zinc White has great permanence and lightfastness.

Toxicity

Zinc White is moderately toxic if ingested and slightly toxic if inhaled.

History

Though historians are divided on who first isolated the element zinc, they agree that it was first suggested as a white pigment in 1782. Zinc White was accepted as a watercolor in 1834 and was called Chinese White due to the popularity of oriental porcelain in Europe at the time. Ten years later, a suitable oil form was produced. By the early 20th century, it had improved to the point where it was an acceptable alternative to Flake White.