Nielsen Bainbridge Metal Frame Kit, Sectional Profile #11, Gold

MP Code #MP-17417-002   
$14.66 - $31.30
$7.89 - $24.68

Achieve a custom look for a fraction of the price. Artwork and photographs can be framed in full inch sizes from 8? to 40? with these metal frame kits made from durable anodized aluminum.
Made from the same material as used by custom picture framers, these anodized aluminum frames are easy to assemble. Two kits are required to assemble a rectangular frame. The beveled face of each moulding section measures 5/16? wide x 7/16" deep. When assembled, the frame can hold a print, protective glazing, and up to two mats, one of which acts as the backing. To create a frame, measure the overall height and width from the outside edges of your artwork. Choose one size kit for length and one size for width, and assemble your frame with the included hardware. Corner angles, eyelet hangers, and spring clips are included with the kit. Cut mats to full inch sizes so they fit snugly behind the beveled front face. You''ll need to provide two mats, glass or glazing material, picture wire, and backing paper (to protect the mat) if desired. Frame Depth ? The depth of a frame refers to the depth of the frame''s rabbet (the cut-out area behind the frame''s molding that holds your artwork in place). To find a frame to accommodate your artwork, measure the depth of the artwork, including any mats or mounting materials, and order a frame with a depth that is, at a minimum, the same as that measured depth. Note ? Frames are sized by the opening, not by the outside of the molding. To determine the size of frame to order, measure the outside of your artwork, including mat, and order that size frame. The frame will overlap the artwork 1/4" all the way around, so your artwork will fit nicely behind the frame''s molding.
Please select an option above to view its attributes.
Voice your opinion! Be the first to review »
Write a review